Kingston 120GB SATA3 2,5" HyperX FURY 7mm (SHFS37A/120G) SSD

SSD disk Kingston 120GB HyperX FURY: s několika vadnými sektory, nevhodný pro OS!!!

Vhodný pro zálohování, přenos dat atp.

Dole výpis ze smartctl

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-169-generic] (local build)

Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family:    SandForce Driven SSDs

Device Model:    KINGSTON SHFS37A120G

Serial Number:   50026B725B074130

LU WWN Device Id: 5 0026b7 25b074130

Firmware Version: 603ABBF0

User Capacity:   120 034 123 776 bytes [120 GB]

Sector Size:     512 bytes logical/physical

Rotation Rate:   Solid State Device

Device is:       In smartctl database [for details use: -P show]

ATA Version is:  ATA8-ACS, ACS-2 T13/2015-D revision 3

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is:   Sun Jan 14 23:02:59 2024 CET

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART Status not supported: Incomplete response, ATA output registers missing

SMART overall-health self-assessment test result: PASSED

Warning: This result is based on an Attribute check.

General SMART Values:

Offline data collection status: (0x02)   Offline data collection activity

               was completed without error.

               Auto Offline Data Collection: Disabled.

Self-test execution status:     (  0)   The previous self-test routine completed

               without error or no self-test has ever

               been run.

Total time to complete Offline

data collection:      (   0) seconds.

Offline data collection

capabilities:         (0x7d) SMART execute Offline immediate.

               No Auto Offline data collection support.

               Abort Offline collection upon new

               command.

               Offline surface scan supported.

               Self-test supported.

               Conveyance Self-test supported.

               Selective Self-test supported.

SMART capabilities:           (0x0003)   Saves SMART data before entering

               power-saving mode.

               Supports SMART auto save timer.

Error logging capability:       (0x01)   Error logging supported.

               General Purpose Logging supported.

Short self-test routine

recommended polling time:   (  1) minutes.

Extended self-test routine

recommended polling time:   ( 48) minutes.

Conveyance self-test routine

recommended polling time:   (  2) minutes.

SCT capabilities:         (0x0025)   SCT Status supported.

               SCT Data Table supported.

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME         FLAG    VALUE WORST THRESH TYPE     UPDATED WHEN_FAILED RAW_VALUE

 1 Raw_Read_Error_Rate    0x0032  120  120  050   Old_age  Always      -      0/0

 5 Retired_Block_Count    0x0033  100  100  003   Pre-fail Always      -      0

 9 Power_On_Hours_and_Msec 0x0032  089  089  000   Old_age  Always      -      10112h+10m+24.950s

 12 Power_Cycle_Count      0x0032  099  099  000   Old_age  Always      -      1443

171 Program_Fail_Count     0x000a  100  100  000   Old_age  Always      -      0

172 Erase_Fail_Count       0x0032  100  100  000   Old_age  Always      -      0

174 Unexpect_Power_Loss_Ct 0x0030  000  000  000   Old_age  Offline     -      40

177 Wear_Range_Delta       0x0000  000  000  000   Old_age  Offline     -      1

181 Program_Fail_Count     0x000a  100  100  000   Old_age  Always      -      0

182 Erase_Fail_Count       0x0032  100  100  000   Old_age  Always      -      0

187 Reported_Uncorrect     0x0012  100  100  000   Old_age  Always      -      0

189 Airflow_Temperature_Cel 0x0000  025  037  000   Old_age  Offline     -      25 (Min/Max 18/37)

194 Temperature_Celsius    0x0022  025  037  000   Old_age  Always      -      25 (Min/Max 18/37)

195 ECC_Uncorr_Error_Count 0x001c  120  120  000   Old_age  Offline     -      0/0

196 Reallocated_Event_Count 0x0033  100  100  003   Pre-fail Always      -      0

201 Unc_Soft_Read_Err_Rate 0x001c  120  120  000   Old_age  Offline     -      0/0

204 Soft_ECC_Correct_Rate  0x001c  120  120  000   Old_age  Offline     -      0/0

230 Life_Curve_Status      0x0013  100  100  000   Pre-fail Always      -      100

231 SSD_Life_Left          0x0000  097  097  011   Old_age  Offline     -      4294967297

233 SandForce_Internal     0x0032  000  000  000   Old_age  Always      -      19440

234 SandForce_Internal     0x0032  000  000  000   Old_age  Always      -      7181

241 Lifetime_Writes_GiB    0x0032  000  000  000   Old_age  Always      -      7181

242 Lifetime_Reads_GiB     0x0032  000  000  000   Old_age  Always      -      6767

244 Unknown_Attribute      0x0000  095  095  010   Old_age  Offline     -      10485920

SMART Error Log not supported

SMART Self-test log structure revision number 1

Num Test_Description   Status                 Remaining LifeTime(hours) LBA_of_first_error

# 1 Short offline      Completed without error      00%    10110        -

SMART Selective self-test log data structure revision number 1

 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

   1       0       0 Not_testing

   2       0       0 Not_testing

   3       0       0 Not_testing

   4       0       0 Not_testing

   5       0       0 Not_testing

Selective self-test flags (0x0):

 After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.