Osciloskop U3P100 paměťový 1Gs 2Gbit 2. kanál USB3 DSCOPE i pro firmy
nebo
Špičkový měřící přístroj - osciloskop s vynikajícím frekvenčním 100MHz, vzorkovacím rozsahem 1Gs a extrémní pamětí 2Gbit pro vzorky. Nejlepší, co lze na současném trhu získat. Špičkový software s intuitivním ovládáním. Vč. kompletního SW pro PC i NB XP,WIN7-W10.
Faktura od CZ5710080893 vč. DPH, umožňující firmám - platcům DPH odpočet 21 proc. DPH. DIČ kupujícího je třeba zaslat předem, pozdější úprava dokladu není možná.
Key Features:
2 analog channels
USB 3.0 interface (5 Gbit/s.)
100MHz bandwidth
Up to 1GSa/s sample rate
Up to 2Gbits hardware memory
Ultra-portable size
Unibody aluminum case
Main Type-C USB 3.0 interface
Auxiliary Type-C USB interface
BNC connectors (Standard Probe Interface)
Extension interface (Pogo Pin Connector)Power SourcePower source voltage: 5VDC±5%
Power consumption: 4W maximumInput output ports
Direction Descriptions Protected Voltage Range
USB 3.0 port InOut Connect to host computer 4.75v ~ 5.25v
Auxiliary USB power port Input Auxiliary power 4.5v ~ 5.5v
BNC connectors Input Connect to probes -100v ~ +100v (DC+AC)
Extension interface InOut Extension probes and module 0-3.3v
Probe compensator Output 3v // ~1KHz square wave —Designed to make your work enjoyableDSCope U3P100 is an USB-based digital oscilloscope, which has a portable size (115x74x16mm), but powerful performance (up to 1GHz sample rate, USB 3.0 interface). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the analog wave and its frequency spectrum at anywhere and anytime.Technical SpecificationsVertical systemBandwidth: 100MHz
Input coupling: DC or AC
Input impedance: 1MΩ // ~16pF
Input sensitivity range: 10mV/Div to 2V/Div
Vertical resolution: 8bits
Maximum input voltage: peaks ≤ ±100V
DC gain accuracy: ±6%
Vertical position range: ±5 divisions
Vertical offset ranges: Volts/Div setting Offset rang
10mV/Div ~ 2V/Div ±100mV ~ ±20V/Div
Common mode rejection ratio(CMRR): —
Channel-to-channel isolation: Horizontal systemMaximum sample rate(single channel): 1GSa/s
Maximum sample rate(dual channel): 500MSa/s
Time base range: 2ns/Div to 10s/Div
Maximum duration of time
captured at highest sample rate (all channels): 2ms (real-time capture)
200ms (single capture)
Record Length (real-time capture): 1M (2 channels enabled)
2M (1 channel enabled)
Record Length (single capture): 128M (2 channels enabled)
256M (1 channel enabled)Trigger systemTrigger mode: Auto
Normal (ch0, ch1, ch0 & ch1, ch0 || ch1)
Trigger position range: 1% ~ 99% of record length
Trigger holdoff range: 1 us ~ 10 s
Trigger types: Edge (rising or falling)
Sensitivity: 0 ~ 0.625 vertical division
Trigger level ranges: ±4.4 vertical division from center screenWaveform measurementsCursors: Horizontal Width/Frequency/Period/Duty
Vertical Amplitude
Automated measurements: Frequency / Period / +Duty /- Duty / +Count
Rise / Fall / +Width / -Width / BrstW
Amplitude / High / Low / RMS / Mean
Pk-Pk / Max / Min / +Over / -OVerWaveform mathFFT: Spectrum magnitude
Length: 1K ~ 16K
Vertical scale: Linear RMS or DBV RMS
Window: Rectangle, Hann, Hamming, Blackman, Flat_top
Math: Add / Subtract / Multiply / DivideWaveform displayTime domain: Real-time viewSingle capture view
X-Y mode: Lissajous FigureSystem RequirementsWindows XP, Vista, Win7, Win8 & Win10
Mac OS X 10.12 or above
Linux: recent Ubuntu, Fedora, Arch, etc.
USB 3.0 Host portWhat’s in the BoxDSCope U3P100 (fully tested)
x2 USB 3.0 cable(1.0m length, A to Type-C)
x2 P2200 probes
x1 Carrying Case