PCES-SH4 PCIE 4/2X SATA 6G CONTROLLER

Vyprodáno

1x zakoupeno

250 Kč

Ukončeno v neděli 7. 5. 2023, 19:05:12

Bezpečný nákup s Aukro Ochranou kupujících

Nakupujete od ověřeného prodejce

Jak nakupovat na Aukru?

Prodejce

Doprava a platba

Zásilkovna na výdejní místo Od 79 Kč

Balíkovna 94 Kč

Kartou online

Bankovním převodem

Podrobnosti

PCES-SH4 PCIE 4/2X SATA 6G CONTROLLER

Popis předmětu

Stav zboží

Rozbaleno

nepoužívaný, rozbalený produkt ve 100% stavu

The AXAGON PCES-SH4 SUPERSPEED HYPERDUO PCI-Express controller will add four independent high-speed SATA 6G channels to your desktop.

Two SATA channels can be routed using jumper either to a pair of external eSATA connectors or to internal SATA connectors.

A controller throughput up to 10 Gbit/s thanks to the use of two lines of PCI-Express bus version 2.0.

The Marvell HyperDuo technology allows the SSD and HDD to be combined into one affordable virtual disk offering high performance and high capacity.

The ARM-based processor of the controller supports the hardware RAID reducing the CPU load while operating the disk array.

Input:
• PCI-Express 2.0 interface, PCI-Express 1.0a / 1.1 / 2.1 / 3.0 compatible.
• Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots.
• A bandwidth of 2-Lane PCI-Express 2.0 bus is 10 Gb/s.

Output:
• 4x independent Serial ATA port, SATA III 6G standard.
• Two channels with an output to internal SATA connectors and two channels with an output either to external eSATA connectors or internal SATA connectors.
• Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities.
• HyperDuo technology, RAID 0, RAID 1, RAID 10 disk array.

Other features:
• Full Plug and Play support.
• Customized configuration of SATA output connectors using jumpers on the controller.
• Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s.
• Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
• Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
• Compliant with Serial ATA AHCI (Advanced Host Controller Interface) specification of 1.0 revision.
• Hot Plug support for connecting and disconnecting SATA devices while running.
• Native Command Queuing (NCQ) support.
• Supports Port Multiplier with FIS-based switching (port multiplier with max. 4 disks can be connected to only one SATA channel at a time - a total of up to 7 disks can be connected to the controller simultaneously).
• Supports 128/256-bit AES encryption in real-time (on-the-fly).
• The controller has its own BIOS - therefore it supports booting from connected disks.
• Two 2-pin sockets for connecting HDD LED indicator light of the case.
• Marvell 88SE9230 chipset is used.

HyperDuo technology:
• The HyperDuo technology developed by Marvell combines the benefits of fast SSDs and cheaper hard disks with high capacity.
• By setting the HyperDuo mode in the controller's BIOS or in the Marvell Storage Utility app, a virtual hybrid disk will be created - one logical partition.
• Two options for HyperDuo mode setting: SAFE Mode backs up SSD data to a hard disk (similar to RAID 1), CAPACITY Mode connects the SSD and HDD storage capacity together.
• SSD stores the most commonly used data (HOT files), either automatically selected by the controller’s algorithm or predefined by the user in the Storage Utility app. Other data (COLD files) are stored on the hard disk.
• The HyperDuo hybrid disk reaches up to 80 % of the SSD's performance according to the selected mode.

Support for SATA disk array configuration in RAID 0, 1, and 10 modes:
• RAID 0 (stripping) - lower security but higher performance thanks to alternating multiple disk writing, min. 2 disks are needed,
• RAID 1 (mirroring) - increased security by writing identical data to two HDDs, min. 2 disks are needed,
• RAID 10 (mirroring+stripping) - combination of stripping and mirroring, fast and safe, less economic, min. 4 disks are needed.
• Configure an array either directly in the BIOS of the controller or using the Marvell Storage Utility in Windows.

Supported operating systems:
• MS Windows Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above - the built-in AHCI driver automatically installs and an external driver does not need to be installed.
• MS Windows XP 32/64bit / Server 2003 32/64bit - an external driver needs to be installed.

The AXAGON PCES-SH4 SUPERSPEED HYPERDUO PCI-Express controller will add four independent high-speed SATA 6G channels to your desktop. Two SATA channels can be routed using jumper either to a pair of external eSATA connectors or to internal SATA connectors. A controller throughput up to 10 Gbit/s thanks to the use of two lines of PCI-Express bus version 2.0. The Marvell HyperDuo technology allows the SSD and HDD to be combined into one affordable virtual disk offering high performance and high capacity. The ARM-based processor of the controller supports the hardware RAID reducing the CPU load while operating the disk array. Input: • PCI-Express 2.0 interface, PCI-Express 1.0a / 1.1 / 2.1 / 3.0 compatible. • Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. • A bandwidth of 2-Lane PCI-Express 2.0 bus is 10 Gb/s. Output: • 4x independent Serial ATA port, SATA III 6G standard. • Two channels with an output to internal SATA connectors and two channels with an output either to external eSATA connectors or internal SATA connectors. • Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. • HyperDuo technology, RAID 0, RAID 1, RAID 10 disk array. Other features: • Full Plug and Play support. • Customized configuration of SATA output connectors using jumpers on the controller. • Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s. • Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). • Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). • Compliant with Serial ATA AHCI (Advanced Host Controller Interface) specification of 1.0 revision. • Hot Plug support for connecting and disconnecting SATA devices while running. • Native Command Queuing (NCQ) support. • Supports Port Multiplier with FIS-based switching (port multiplier with max. 4 disks can be connected to only one SATA channel at a time - a total of up to 7 disks can be connected to the controller simultaneously). • Supports 128/256-bit AES encryption in real-time (on-the-fly). • The controller has its own BIOS - therefore it supports booting from connected disks. • Two 2-pin sockets for connecting HDD LED indicator light of the case. • Marvell 88SE9230 chipset is used. HyperDuo technology: • The HyperDuo technology developed by Marvell combines the benefits of fast SSDs and cheaper hard disks with high capacity. • By setting the HyperDuo mode in the controller's BIOS or in the Marvell Storage Utility app, a virtual hybrid disk will be created - one logical partition. • Two options for HyperDuo mode setting: SAFE Mode backs up SSD data to a hard disk (similar to RAID 1), CAPACITY Mode connects the SSD and HDD storage capacity together. • SSD stores the most commonly used data (HOT files), either automatically selected by the controller’s algorithm or predefined by the user in the Storage Utility app. Other data (COLD files) are stored on the hard disk. • The HyperDuo hybrid disk reaches up to 80 % of the SSD's performance according to the selected mode. Support for SATA disk array configuration in RAID 0, 1, and 10 modes: • RAID 0 (stripping) - lower security but higher performance thanks to alternating multiple disk writing, min. 2 disks are needed, • RAID 1 (mirroring) - increased security by writing identical data to two HDDs, min. 2 disks are needed, • RAID 10 (mirroring+stripping) - combination of stripping and mirroring, fast and safe, less economic, min. 4 disks are needed. • Configure an array either directly in the BIOS of the controller or using the Marvell Storage Utility in Windows. Supported operating systems: • MS Windows Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above - the built-in AHCI driver automatically installs and an external driver does not need to be installed. • MS Windows XP 32/64bit / Server 2003 32/64bit - an external driver needs to be installed.

Nabídka č. 7037531538 Vystaveno 07.05. 10:05 Zobrazení: 0